RRD Spinner Pro Front Wing Y31 530
- 530area, cm²
- 570span, mm
- 6.50aspect ratio
- Mid-lowaspect · AR 6.0 – 8.5
Family SPINNER PRO Brand’s category All-round / freeride Disciplines wing, prone Carbon
The Spinner Pro Front Wing Y31 runs 3 sizes, 530–780 cm², and holds its proportions across the range: every size publishes an aspect ratio within 5% of the others.
Its 570 mm span is 19% narrower than typical for the area — the median across the 52 current wings within 10% of its size is 700 mm.
Closest wings from other brands
Projected and flat area run 3–8% apart. A marked area is one whose brand does not state which it publishes, so a comparison inside the area tolerance may be comparing unlike figures.
| Brand | Wing | Area cm² | Δ area | Aspect ratio | Δ AR | Span mm | Band |
|---|---|---|---|---|---|---|---|
| F-One | ESCAPE HM Carbon 530 | 530 | +0.0% | 6.30 | -3.1% | 580 | Mid-low aspect |
Specifications
| Family | SPINNER PRO |
|---|---|
| Size | 530 |
| Area, cm² | 530 |
| Area basis | unknown |
| Span, mm | 570 |
| Chord, mm | — |
| Aspect ratio | 6.50 |
| Band | Mid-low aspect |
| Brand’s category | All-round / freeride |
| Disciplines | wing, prone |
| Construction | Carbon |
| Model year | — |
| Source | manufacturer |
The brand publishes this aspect ratio, but its own span and area (span² ÷ area) give a figure 5–10% away. The published number is kept and marked.
Data current to August 2026. Every figure above is the manufacturer's published claim, converted to comparable units.