Omen front wings and foilboards

Every Omen hydrofoil front wing: 5 wings across 2 families, with true area in cm², span in mm and aspect ratio, taken from Omen's own published specifications and directly comparable with every other brand.

• 5front wings listed
• 5current
• 2model families
• 700–1,100area, cm²
• 7.7–10.4aspect ratio

All front-wing specifications

Scroll across for more specifications →

Every Omen front wing in the dataset. Area is true area in cm², converted where the brand publishes square inches or numbers its sizes by span. Aspect ratio is the brand's own figure where it publishes one and reconciles with its geometry, otherwise span² ÷ area.

Product	Area cm²	Span mm	Chord mm	Aspect ratio	Band	Source
AgentAgent 700	700	843	—	10.10	High aspect	manufacturer
AgentAgent 900	900	954	—	10.10	High aspect	manufacturer
AgentAgent 1100	1,100	1,070	—	10.40	High aspect	manufacturer
OperatorOperator 850	850	900	—	9.50	Mid aspect	manufacturer
OperatorOperator 1050	1,050	900	—	7.70	Mid-low aspect	manufacturer

5 of 5 areas on this page may be projected or flat: Omen does not state which it publishes, and the two run 3–8% apart. Those are marked like that, and hovering one gives the reason.

How to read these numbers

The number a brand prints on a wing is not comparable across brands: some name a wing by its area in cm², some by its span in millimetres, some by square inches. Everything here is converted so the columns mean the same thing on every page. Where a brand's published aspect ratio contradicts its own span and area by more than 10%, the geometry is used instead and the row says so on the map.

Every Omen foilboard: 22 boards across 4 families, with volume in litres, length in feet/inches, width in inches and slenderness, taken from Omen's own published specifications.

• 22foilboards listed
• 22current
• 4model families
• 15–120volume, L
• 4'1"–6'9"length, ft/in

All foilboard specifications

Scroll across for more specifications →

Every Omen foilboard in the dataset. Volume is the brand's own figure in litres; length is in feet/inches and width in inches. Slenderness is length ÷ width, computed here, and blank where the brand publishes no width.

Product	Construction	Volume L	Length ft/in	Width in	Slenderness	Mount	Build	Source
CapacitorCapacitor 35L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal); nose carbon swapped for black S-glass	35	4'11"	18.5"	3.19	—	hard	manufacturer
CapacitorCapacitor 45L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal); nose carbon swapped for black S-glass	45	5'4"	19.49"	3.28	—	hard	manufacturer
CapacitorCapacitor 56L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal); nose carbon swapped for black S-glass	56	5'8"	20.51"	3.31	—	hard	manufacturer
EmissaryEmissary 28L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	28	4'6"	17.76"	3.04	—	hard	manufacturer
EmissaryEmissary 35L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	35	4'10"	17.99"	3.22	—	hard	manufacturer
EmissaryEmissary 44L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	44	5'0"	18.5"	3.24	—	hard	manufacturer
EmissaryEmissary 55L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	55	5'5"	19.49"	3.34	—	hard	manufacturer
EmissaryEmissary 66L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	66	6'0"	19.49"	3.69	—	hard	manufacturer
EmissaryEmissary 78L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	78	6'5"	20.51"	3.75	—	hard	manufacturer
EmissaryEmissary 90L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	90	6'7"	20.51"	3.85	—	hard	manufacturer
EmissaryEmissary 105L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	105	6'9"	21.5"	3.77	—	hard	manufacturer
Enigma15L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal); "significantly heavier layup and denser foam core than any of our other boards"	15	4'1"	17.28"	2.84	—	hard	manufacturer
Enigma20L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal); "significantly heavier layup and denser foam core than any of our other boards"	20	4'5.4"	19.02"	2.81	—	hard	manufacturer
Flux V2Flux 34L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	34	4'4"	18.5"	2.81	—	hard	manufacturer
Flux V2Flux 40L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	40	4'8"	19.02"	2.94	—	hard	manufacturer
Flux V2Flux 50L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	50	5'0"	20"	3.00	—	hard	manufacturer
Flux V2Flux 60L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	60	5'5"	20.98"	3.10	—	hard	manufacturer
Flux V2Flux 72L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	72	5'9"	22.01"	3.14	—	hard	manufacturer
Flux V2Flux 84L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	84	6'0"	22.52"	3.20	—	hard	manufacturer
Flux V2Flux 96L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	96	6'2"	22.99"	3.22	—	hard	manufacturer
Flux V2Flux 108L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	108	6'5"	23.5"	3.28	—	hard	manufacturer
Flux V2Flux 120L	full carbon layup over a CNC-cut closed-cell foam core, vacuum resin infusion (Appletree, Portugal)	120	6'9"	25"	3.24	—	hard	manufacturer

How to read these numbers

Volume is printed in litres by nearly every brand, often in the model name. Board lengths are in feet and inches; widths and thicknesses in inches. Explicit source imperial figures are retained where they agree with the stored measurement. Otherwise lengths are converted to the nearest 0.1 inch and widths and thicknesses to 0.01 inch, using exactly 25.4 millimetres per inch. Volume stays in litres. Missing dimensions stay blank; calculations and drawings use the unrounded stored figures. Slenderness, length ÷ width, is computed from the brand's own two figures and never typed in: how long a board is for its width. Discontinued boards are shaded. Mount is the brand's own statement of how a mast attaches.