Ozone front wings and foilboards

Every Ozone hydrofoil front wing: 7 wings across 2 families, with true area in cm² and span in mm, taken from Ozone's own published specifications. Aspect ratios include recorded calculations or values whose origin is not established; qualifications are explained below the table.

• 7front wings listed
• 0current
• 2model families
• 800–1,800area, cm²
• 3.6–7.3aspect ratio

All front-wing specifications

Scroll across for more specifications →

Every Ozone front wing in the dataset. Area is true area in cm², converted where the brand publishes square inches or numbers its sizes by span. Aspect ratio retains the recorded value unless span² ÷ area differs by more than 10%; geometry is also used when no value is recorded. A calculation or unknown origin is marked, even when the numbers agree.

Product	Area cm²	Span mm	Chord mm	Aspect ratio	Band	Source
Apex V1 LAApex LA1200	1,200	660	—	3.60	Low aspect	manufacturer
Apex V1 MAApex MA800	800	752	—	7.00	Mid-low aspect	manufacturer
Apex V1 MAApex MA950	950	810	—	6.90	Mid-low aspect	manufacturer
Apex V1 MAApex MA1100	1,100	880	—	7.00	Mid-low aspect	manufacturer
Apex V1 MAApex MA1250	1,250	924	—	6.80	Mid-low aspect	manufacturer
Apex V1 MAApex MA1500	1,500	1,000	—	6.67	Mid-low aspect	manufacturer
Apex V1 MAApex MA1800	1,800	1,150	—	7.30	Mid-low aspect	manufacturer

1 of 7 aspect ratios on this page are qualified. 1 marked recorded (origin unknown): This aspect ratio's origin is not established in the research record. Agreement with span and area does not establish that the brand published it. 7 of 7 areas on this page may be projected or flat: Ozone does not state which it publishes, and the two run 3–8% apart. Those are marked like that, and hovering one gives the reason. Every other aspect ratio is Ozone's own, and reconciles with Ozone's own geometry.

How to read these numbers

The number a brand prints on a wing is not comparable across brands: some name a wing by its area in cm², some by its span in millimetres, some by square inches. Everything here is converted so the columns mean the same thing on every page. Where a brand's published aspect ratio contradicts its own span and area by more than 10%, the geometry is used instead and the row says so on the map.

Every Ozone foilboard: 6 boards across 2 families, with volume in litres, length in feet/inches, width in inches and slenderness, taken from Ozone's own published specifications.

• 6foilboards listed
• 1current
• 2model families
• 40–90volume, L
• 4'1.2"–5'5"length, ft/in

All foilboard specifications

Scroll across for more specifications →

How to read these numbers

Volume is printed in litres by nearly every brand, often in the model name. Board lengths are in feet and inches; widths and thicknesses in inches. Explicit source imperial figures are retained where they agree with the stored measurement. Otherwise lengths are converted to the nearest 0.1 inch and widths and thicknesses to 0.01 inch, using exactly 25.4 millimetres per inch. Volume stays in litres. Missing dimensions stay blank; calculations and drawings use the unrounded stored figures. Slenderness, length ÷ width, is computed from the brand's own two figures and never typed in: how long a board is for its width. Discontinued boards are shaded. Mount is the brand's own statement of how a mast attaches.